Belkin F5U237EA user manual INSTALLATIONEn, P74387eaF5U237eauk 09-09-2003 1007 Page

P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 5

INSTALLATIONEn

Important Note: Do not connect USB devices to the hub until you are instructed to do so in step 4 of this user guide.

1.Plug the AC adapter into a wall outlet, or surge suppressor. Plug the DC connector into the DC Power Jack found on the rear of the hub

2.Plug the flat end (USB A connector) of the provided USB device cable into the downstream port of your computer, or downstream port of another hub, then plug the other end (USB mini B connector) of the device cable into the upstream port on the rear of the hub.

Important Note: The hub must be connected to a USB 2.0 compliant host in order to function in Hi-Speed mode (480Mbps data rate). If the hub is connected to a USB 1.1 compliant host, it will operate only in Low Speed or Full Speed mode (1.5 Mbps/12 Mbps).

3.Windows will now detect your hub and install the required driver support. (The Windows “Install New Hardware Wizard” may prompt you to provide your Windows Installation CD to complete the driver installation process).

5