Using your Thumb Keyboard
Using your Thumb Keyboard
5
6
After installing the Thumb Keyboard driver, the software runs automatically
and you can use the Thumb Keyboard at any time. Simply attach the
Thumb Keyboard to your Axim and start typing.
Typing Lowercase Letters
To enter lowercase let ters with your T humb Keyboard, sim ply type them
as you would on a s tandard compute r keyboard.
Typing Upperca se Letters
To capitalize one let ter: press
once and the next letter you enter will
be capitalized.
To capitalize a block of letters: pr ess and hold
—all other letters you
enter while holdin g
will be capital ized.
To turn on Caps Lock: press
and then press
. As long as
Caps Lock is turn ed on, all char acters will be e ntered in upperc ase.
To release Caps Lock : press
and then press
.
Typing Numbers and Symbol s
To type one number or symbol: press
once—the next key you press
once—the next key you press
will register as the number or symbol pr inted in orange on the key top.
There are two ways to type a block of numbers or sy mbols:
1.
Press and hold
—all other keys you pr ess while holdin g
will register the number or symbol.
2.
Press
twice—the Keyboard will enter “Symbol Lock” mod e. All
twice—the Keyboard will enter “Symbol Lock” mod e. All
subsequent keys you press will register as the number or symbol
printed in orange on the key top. To exit “Symbol Lock” mode, press
one more time.
one more time.
Navigation Key s
The navigation keys enable you to quickly relocate the cursor on your
Axim. The following table lists available navigation-key commands.
Applicatio n Keys
Since the Thumb Keyboard covers the application buttons on your Axim,
these buttons are reproduced on the Thumb Keyboard.