How to reset the print head life counter
You must reset the print head life counter when you replace the print head.
13 In Screen 1, press 11 times to display INK RESET screen. <Screen 12>
14 Press 
to display Screen 13. If you
want to reset the counter, press 
. And you can see Screen 14 for 3 seconds.
If you do not want it, press 
to go Screen 12.
Go to 7 to close the job.
<Screen 12>
< < S E T U P M O D E > >
I N K R E S E T
<Screen 13>
I N K R E S E T
N o - M o d e 1 Y e s - M o d e 2
<Screen 14>
R E S E T F i n i s h ! !
How to test the printing using the operator panel
You can check the print result as follows:
15 Turn the endorser on by following the procedure of “page
16 Turn the power of the scanner on while pressing Mode 2 . The LCD displays MAIN- TENANCE MODE initial screen.
<Screen 15>
17 Press | Mode 2 once, then press Mode 1 once. |
Place a document on the stacker, then | |
press | Start . |
NOTE
<Screen 15> |
|
< < C E | M O D E > > |
T E S T x x | : S T A R T |
•The scanner prints
• Before pressing Start you can set the document size, resolution and so on (See Chapter 3).
