Setting picking time
When you set the picking time, you must set as follows:
1 | In Screen 2, press Mode 1 14 times (15 |
| times for M3099GX/GH) to display PICK |
| TIMER screen. <Screen 32> |
2 | Press Mode 2 to display Screen 33. |
| (The default setting is 2 seconds.) |
3 | In Screen 33, press Mode 1 until the digit |
| you want to change blinks. Then press |
| Mode 2 until the value you want to select |
appears. (The selectable range is from 0.5 to 99.5 seconds in steps of 0.5 seconds.)
4Press Mode 1 and Mode 2 at the same time to display Screen 32.
The settings are stored in EEPROM.
5When you close the setup mode, press
Stop .
<Screen 32>
< < S E T U P M O D E > >
P I C K T I M E R
<Screen 33>
< < S E T U P M O D E > >
| X | X . X | S |
(Blinking) |
| ||
| Setting |
1 | In Screen 2, press Mode 1 15 times |
| (16 times for M3099GX/GH) to display |
| |
2 | Press Mode 2 to display Screen 35. |
| (The default setting is 30 seconds.) |
3 | In Screen 35, press Mode 1 until the digit |
| you want to change blinks. Then press |
| Mode 2 until the value you want to select |
| appears. (The selectable range is from 1 to |
| 1999 seconds in steps of 1 second.) |
4 | Press Mode 1 and Mode 2 at the same time |
| to display Screen 34. The settings are |
| stored in EEPROM. |
<Screen 34>
< < S E T U P M O D E > >
T I M E - O U T S E T
<Screen 35>
T I M E - O U T S E T
X X X X S
(Blinking)
5When you close the setup mode, press
Stop .
