Fujitsu M3099GX, M3099GH, M3099EX, M3099EH manual Button LED Function, Start, Stop

	/
	Button LED Function
Button name		Function
	Start	This button is used to indicate	Start	to scanner in maintenance mode or SETUP mode at Off-line. This
		button is disabled while scanner operates in On-line.
	Stop	This button is used to indicate	Stop	to scanner in maintenance mode or SETUP mode at Off-Line. This
		button is used to cancel temporary error while operating at On-line.
	Manual	This button is used to select manual feeding mode. By pressing this button, setting is switched between
		manual feeding and ADF mode.
	Mode 1	Activates the setup mode. (See Chapter 7)

Mode 2

Activates the maintenance mode.

LED	Function
Power	When the Power switch is turned on, this LED is turned on.
Ready	While scanning,this LED is turned on.
Check	When a scanner malfunction is detected, this LED is turned on. When temporary error (Paper Jam, and so
	on) is detected, this LED is blinked. When temporary error is cleared and Stop button is pressd, this LED
	will be turned off.

1-11