Start / Stop button

Press each button to start or stop reading.

Start button

Read operation can be started in either manual or automatic start mode. To start reading in manual start mode, press this button while the ready indicator is lit. (*1)

*1: Make sure that the LCD is the initial screen of simplex or duplex reading mode. If not, press

Stop button once, then press Start

button.

Manual start mode: Reading is started by

Start button.

Automatic start mode: Reading is started by a command from the host machine.

Stop button

This button is effective regardless of mode: manual or automatic mode.

Press this button to stop read operation.

When Stop button is pressed:

During reading: Reading immediately stops and the document being fed is ejected to the stacker. The hopper table is lowered to the bottom.

Before reading: A picked document, if any, is ejected to the stacker. The button works only when a document is picked. The hopper table is lowered to the bottom.

NOTE

If a document which is not picked remains in front of ADF, set the document on the hopper again.

3-16

Page 51
Image 51
Fujitsu M3099EH, M3099GX, M3099GH, M3099EX manual Stop button