Fujitsu M3099GH, M3099EH Setting RS-232C transfer rate M3099EX/EH, Setting SCSI-ID M3099GX/GH

Mode 2

Mode 1

Mode 1

Mode 2

Mode 1

Mode 2

Mode 2

Mode 1

Setting RS-232C transfer rate (M3099EX/EH)

When you set RS-232C transfer rate, you must set as follows:

1 In Screen 2, press 12 times to display RS-232C BAUD screen. <Screen 24>

2 Press to display Screen 25. (The default setting is 4800 bps.)

3 In Screen 25, press Mode 1 until the rate you want to select blinks.

4 Press to display Screen 24. The settings are stored in EEPROM.

5When you close the setup mode, press

Stop .

<Screen 24>

< < S E T U P M O D E > > R S 2 3 2 C B A U D

<Screen 25>

< < S E T U P M O D E > >

9 6 0 0 : 4 8 0 0 : 2 4 0 0 : 1 2 0 0

(Blinking)

Setting SCSI-ID (M3099GX/GH)

When you set the picking start time, you must set as follows:

1 In Screen 2, press 12 times to display SCSI-ID SET screen. <Screen 26 >

2 Press to display Screen 27. (The default setting is “5”.)

3 In Screen 27, press to change

SCSI-ID. Each time is pressed, SCSI-ID changed from 0 to 7.

4 Press to display Screen 26. The settings are stored in EEPROM.

5When you close the setup mode, press

Stop .

<Screen 26>

< < S E T U P M O D E > >

S C S I - I D S E T

<Screen 27>

S C S I - I D S E T

5

7-11