Setting pick speed
When you set the pick speed, you must set as follows:
1 In Screen 2, press Mode 1 7 times to display PICK SPEED SET screen. <Screen 22>
2 Press 
to display Screen 23. (The default setting is “FAST”.)
If “FAST” is displayed, the pick speed is fast. If “SLOW” is displayed, the pick speed is slow.
Each time 
is pressed, “FAST” and “SLOW” appear alternately. The setting is stored in EEPROM automati- cally.
3 Press 
to return to Screen 22. When you close the setup mode, press
Stop .
<Screen 22>
< < S E T U P M O D E > >
P I C K S P E E D S E T
<Screen 23>
P I C K S P E E D S E T
F A S TS L O W (Blinking)
Setting initial value of endorser
Before setting, see page
•The use of Endorser (ON/OFF)
The default setting is “OFF” (Endorser is not used.)
•The initial number
The default setting is “00000”.
The selectable range is from 00000 to 65535.
NOTE
If the specified value is equal or grater than 65536, returning to SETUP menu will be failed.
