Fujitsu M3099GH Setting reset method of endorser, Resetting of endorser, Resetting of ink counter

<Method of Increment >

When the initial value is “00001”.

00001	(1 Page)
00002	(2 Page)

65534	(65534 Page)
65535	(65535 Page)

NOTE

•If “depending on operator panel” is not set by host machine, you can not change the setting.

•When “depending on operator panel” is selected, printing starts at the position 20 mm back from the top end of the back side.

Setting reset method of endorser

Before setting, see page 6-2, “Chapter 6 ENDORSER, Panel Operation”.

The default setting is “ON” (The print number will be reset when HOPPER EMPTY is detected.)

Resetting of endorser

Before setting, see page 6-2, “Chapter 6 ENDORSER, Panel Operation”.

Resetting of ink counter

Before setting, see page 6-2, “Chapter 6 ENDORSER, Panel Operation”.

7-10