Document Quality

This section describes document types and weights available for the scanner, and precautions.

Document type

The recommended paper type for document is as follows:

NOTE

Use the specified paper only. (In rare occasion, double feeding may occur or document damage may occur.)

Fine paper

Plain paper (for example, the paper specified for XEROX4024)

OCR paper

When using all other type paper, check that it is successfully fed by ADF before performing a reading operation.

Paper weight

The paper weight is as follows :

• 52 to 127 g/m2 3.9 to 34 lb)

Precautions

Be careful not to scan the following document. Preliminary document feed test may be necessary to avoid the unexpected errors. If the document slips in ADF (JAM error) or double feed occurs frequently, separation pressure adjustment in Reference Guide may be effective.

Paper with clips

Paper with wet ink

Paper of which thickness is not constantly equal. (like envelope)

Paper with large rumples or curl. (See NOTE on the next page.)

Paper with folds or tears

Tracing paper

Coating paper

Carbon paper

Carbonless paper

Paper smaller than 76 mm x 63 mm size, or larger than A3

Other than paper ; clothes, metal foil, or OHP film

Photographic paper

Paper with notches on its side

Other than rectangle paper

4-2

Page 56
Image 56
Fujitsu M3099GX, M3099GH, M3099EX, M3099EH manual Document Quality, Document type, Paper weight, Precautions