How to select the print number reset method
You can choose whether to reset or not the print number when “HOPPER EMPTY” is detected.
8 | In Screen 1, press Mode 1 9 times to |
| display ENDORSER RESET METHOD |
| screen. <Screen 7> |
9 | Press Mode 2 to display Screen 8. Press |
Mode 1 to display “ON” or “OFF”. Each time you press Mode 1 , “ON” and “OFF” appear alternately. Select “ON” to reset the print number when “HOPPER EMPTY” appears and select “OFF” not to reset. The setting is automatically stored in EEPROM.
10 Press 
to return to Screen 7. Go to 7 to close the job.
<Screen 7>
< < S E T U P M O D E > >
E N D O R S E R R E S E T M E T H O D
<Screen 8>
H O P - E M P T Y R E S E T
O N
How to reset the print number manually
You can reset the print number to the initial number using the operator panel.
11 In Screen 1, press 10 times to display ENDORSER RESET screen. <Screen 9>
12 Press 
to display Screen 10 where “OFF” and the current print number are displayed.
If you want to reset the number, press
. And you can see Screen 11 for 3 seconds. If you do not want it, press 
to go Screen 9.
Go to 7 to close the job.
<Screen 9>
< < S E T U P M O D E > >
E N D O R S E R R E S E T
<Screen 10> |
|
|
R E S E T | V A L U E | 0 0 0 0 1 |
N o - M o d e 1 Y e s - M o d e 2 | ||
<Screen 11> |
|
|
R E S E T F i n i s h ! ! | 0 0 0 0 1 | |
