Issue
The rubber friction washer is out of position and I cannot insert the cigarette lighter adapter into the car’s power outlet.
Solution
Please use a clean and empty table for disassembly. DO NOT ATTEMPT TO DO THIS IN THE CAR. Please use pliers to loosen the nut at the end of the cigarette lighter adapter slightly. It is not necessary to unscrew the entire nut. Move the friction washer back into centered position. Use pliers to tighten the nut firmly.
Issue
I pulled the TuneBase FM out of the power outlet of my car but the rubber washer slipped off and remained in the power outlet. Solution
This is rare, but if it occurs:
DISCONNECT THE BATTERY OF YOUR CAR BEFORE ATTEMPTING TO REMOVE THE WASHER! ANY ATTEMPT TO REMOVE THE WASHER WITHOUT DISCONNECTING THE BATTERY MAY RESULT IN PHYSICAL HARM OR DAMAGE TO THE CAR.
Use pliers to carefully remove the friction washer from the power outlet.
Troubleshooting 11
