Troubleshooting, Support, and Warranty

I am having difficulty setting up Wired Equivalent Privacy (WEP) security on my Router..

1..Log in to your Router.. Visit http://router/ with your web browser.. Click on the “Login” button in the top right-hand corner of the screen.. You will be asked to enter your password.. If you have never set a password, leave the “Password” field blank and click “Submit”..

2..Click “Wireless” in the left-hand menu.. Then click “Security” just below that..

3..Select the “128-bit WEP” option..

4..You may type in a WEP key manually, or generate one from a passphrase.. Type a phrase in the “Passphrase” field and click the “Generate” button.. A WEP key is composed of 26 hexadecimal digits (0–9, A–F.... For example, C3 03 0F AF 4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key..

5..Click “Apply Changes” to finish.. Your wireless activity is now encrypted.. Each computer using your wireless network will need to use the new key..

Note: If you are configuring the Router over a wireless connection, you will have to re-connect to the Router after changing any security settings..

Note: Some older networking hardware supports only 64-bit WEP encryption.. If your older computers cannot connect to your network, try 64-bit WEP..

27

Page 29
Image 29
Belkin N600 user manual Troubleshooting, Support, and Warranty