P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 7
ASSEMBLING YOUR DRIVE ENCLOSURE
10.Plug the square-shaped connector of the USB cable into the USB port on the rear panel of the External Drive.
11.Plug the rectangular-shaped connector of the USB cable into a Hi-Speed USB 2.0 port on your computer or Hi-Speed USB 2.0 hub. You may also connect the cable to a full-speed USB 1.1 port on your computer or full-speed USB 1.1 hub.
Note: When connected to a full-speed USB 1.1 port, the maximum USB bandwidth will be 12 Mbps.
12.Plug the AC power cord into the power connector on the rear panel of the External Drive, and into an AC wall outlet.
13.Power on the drive.
14.Proceed to Driver Installation section.
7
