P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 3
ASSEMBLING YOUR DRIVE ENCLOSURE
1.Remove top of the External Drive.
2.If you are installing a 31/2-inch hard drive, check to make sure your drive is set to “Master” (see jumper setting information printed on top of your disk drive), then connect the 34-position data cable and 4-position power cable.
3.If you are installing a CD/CD-RW drive, check to make sure your drive is set to “Master”, then connect the
34-position data cable, 4-position power cable, and 4-position audio cable.
4.Choose the set of mounting holes that match the drive you intend to use, and install at least four of the provided mounting screws.
3
