1
___
2
___
3
___
4
___
5
6
___
7
Troubleshooting
•Make sure you have properly established communication/ synchronization between the receiver and the Mouse and Keyboard.
•If the Mouse is not working, make sure that the LED on the Mouse starts flashing when you push any of the Mouse buttons, or move the Mouse. If the LED does not flash, check to make sure you have installed the batteries correctly.
•When the Mouse LED is flashing, the LED on the receiver should also flash to indicate they are speaking to each other. If the LED on the receiver does not flash, it means that the devices have not connected properly. Repeat step 4 to 7 of the quick installation guide.
•If your Mouse pointer becomes choppy on- screen or the Keyboard does not register keystrokes, replace batteries with a fresh set.
•If your Cursor is controlled by another system in an office or
try to unload the batteries, insert them again after 2 minutes and repeat step 3 to step 7 of the quick installation guide.
10
