Belkin P75179ea manual Connecting Networking Devices to your Switch

Connecting Networking Devices to your Switch

Connecting your Switch to your Computers

1.Power down all your equipment.

2.Connect a Category 5e or 6 Ethernet cable between each computer’s network interface card (NIC) and one of the numbered ports on the front of the Switch.

3.All switch ports can automatically negotiate speeds at full- and half-duplex modes to allow users to attach 10Base-T, 100Base-Tx, and 1000Base-T network devices.

4.Connect the power cord into the power socket in the rear of the Switch; now plug the other end of the power cord into a power source (wall jack or power strip).

4