Connecting Networking Devices to your Switch
Connecting your Switch to another Switch
1.Connect a Category 5e or 6 cable between one of the numbered ports on the front of the Switch and one of the numbered ports on the other Switch to which you are cascading or connecting.
2.All switch ports can automatically negotiate speeds at
3.All ports support auto MDI and MDIX functionality. When cascading or connecting switches or hubs, the user can use a
Important: When connecting two switches together, use a single cable. If multiple cables are used, loops may occur resulting in unwanted collisions. This will result in poor network performance.
Cabling Distances
•328 ft. (100m)
Recommended Cabling Standard
•Category 5e or 6 for Gigabit connections (1000Mbps)
•Category 5 for Ethernet (10Mbps) and Fast Ethernet connections (100Mbps)
1
2
3
4
5
6
7
8
section
5
