Troubleshooting
Power Console is not providing power.
•Check to ensure that the Power Console is plugged into a properly earthed AC wall socket. Some sockets require a wall switch to be turned on in order to deliver power to the socket.
•Too many devices may be plugged into the Power Console, which are overloading the unit and tripping the overload circuit breaker. The Power Console is not designed to handle current loads larger than 10 Amps or 2400 watts. Try unplugging some devices and resetting the circuit breaker located on the end of the Power Console.
To reset the circuit breaker: Wait at least 10 minutes after the circuit breaker was tripped before attempting to reset the breaker. Press the button located next to the power cable on the back of the unit to reset. Power should be restored to the sockets on the Power Console.
•Your components may be plugged into a “Switched” socket and the socket is not switched on. Check to ensure that the “Switched ON” indicator on the Control Panel is illuminated. If the light is not illuminated, press the “Switched” button on the front of the Power Console unit until the “Switched ON” indicator is illuminated. You should now have power to all of the switched sockets.
•Your components may not be turned on. Power may be flowing from the Power Console, but if the power switch on your component is not turned on, your component cannot receive power. Turn on your component’s power switch.
•The surge protection components may be expired. The Power Console is designed to stop delivering power to all sockets when the surge- protection circuitry is not functioning properly or is expired. Call Belkin Customer Service for assistance.
•The Power Console may be defective. Call Belkin Customer Service for assistance.
“Earth Fault” indicator is lit.
•Check to make sure that the Power Console is plugged into an earthed AC wall socket. Do not use any plug adapters.
•If the “Earth Fault” indicator is still lit, you have an
PureAV Power Console
22
