9
H
B
14
3
2
1
10
Fig. 5
5. PLACE the left cabinet side (B) on a soft surface with the levelling foot facing the rear as shown.
A. SCREW two cam lock pins (1) into the upper and center cross frame, and three cam lock pins
(1) into the bottom cross frame. INSERT two smaller dowels (3) into each of the cross frames.
B. INSERT two cam locks (2) into the underside of each shelf panel (D), (E) and three cam locks
into the underside of the bottom shelf panel (F) as shown.
C. INSERT hinge pin (10) into the cabinet side above the top shelf as shown in Fig. 5.
D. With the arrows on the dividers (H) facing FORWARD, CAREFULLYALIGN the assembled
interior shelves and dividers with cam lock pins and dowels on the cabinet side and SECURE
them together by turning the cam locks to tighten. DO NOT FORCE the pieces together.
Alignment may require some slight movement of the parts to get the proper fit.
E. INSERT the top shelf support rod (14) into the predrilled holes in the cabinet side (B) as shown.