Fig. 6
C
3
6. Placement of the right cabinet | 10 |
side (C): |
|
A. SCREW two cam lock pins (1)
into the upper and center cross G frame, and three cam lock pins
(1)into the bottom cross frame. INSERT two smaller dowels (3) into each of the cross frames.
B.INSERT two cam locks (2) into the underside of each shelf panel (D), (E) and three cam locks into the underside of the bottom shelf panel (F) as shown.
C.CAREFULLY ALIGN and PLACE the top door panel (G) onto the cabinet side (B) so that it is resting on the hinge pin (10). INSERT the remaining hinge pin (10) into the exposed end of the top door panel as
shown in Fig. 6. | D | |
D. With the adjustable foot on the | E | |
cabinet side panel (C) facing | ||
| ||
towards the rear, CAREFULLY | F | |
ALIGN the cabinet side panel | ||
B | ||
with the assembled interior shelves |
| |
and dividers and SECURE them |
| |
together by turning the cam locks to |
| |
tighten. DO NOT FORCE the pieces |
|
together. Alignment may require some slight movement of the parts to get the proper fit.
E. SCREW the adjustable center leg (J) into the insert located in the bottom of the cabinet.
1
2
J
10
