Then enter the 4 WEP keys in the Key 1, Key 2, Key 3 and Key 4 entry filed. Select one WEP key as an active key before enabling use of encryption

NOTE

The WEP key must be set up exactly the same on the Wireless

Access Points as they are on the wireless client stations. If you use Key 1 on

the Wireless LAN Access Point, the same value must be assigned to Key 1 for

all client stations.

3.3.6 Access Control

The Access Control Table enables you to restrict wireless stations accessing the Wireless Access Points by identifying the MAC address of the wireless devices.

Use the following buttons to manage the Access Control Table: Enable – allow network access from stations in the list

Change – to change and add the entries in the table if you enter the incorrect MAC address

Reverse Access – Change to Enable for reverse access (Only those Mac Address in the table are prohibited )

20

BENQ Corporation