1.2.2 Three ways to acquire WAN’s IP address

There are three ways to acquire AWL700’s WAN IP address. The first one is to assign its WAN interface as a static valid IP address. Or, the users can acquire AWL700’s WAN IP address by PPPoE and it does not require the users to install PPPoE client software in their own hosts. The third one is to obtain DHCP server. Some service providers offer their clients IP addresses by DHCP protocol, and AWL700 can act as a DHCP client via its 10/100 base-TX WAN port to acquire its WAN IP address. In fact, AWL700 is a convenient device, because it provides both 10/100 base-TX WAN port and 10/100 base-TX LAN ports for users to acquire IP address to share.

1.2.3 Act as a DHCP server in its LAN side

AWL700 can act as a DHCP server in its LAN side, and this function can be performed without users to configure their own IP addresses. When users are booting their machines, AWL700 will assign each machine with an IP address and other useful information, such as DNS server’s IP address etc.

1.2.4 Virtual Server

Users can set up different kinds of servers behind their AWL700 and remote users can access these inside servers via AWL700’s virtual server functionality.

1.2.5 NAT-type Firewall

AWL700 is also guarded by NAT-type firewall. A NAT-type firewall provides users a secure LAN environment and it also denies access for any anonymous people who might have bad intensions on your network.

1.2.6 Web Management

Users can configure and manage AWL700 from their own web browsers (IE or Netscape). This means that users could manage AWL700 no matter where they are and without any proprietary application installed in their PC.

1.2.7 Firmware Upgrade

AWL700 provides an efficient way to upgrade firmware. Users can use web browser to do firmware upgrades and the device also allows TFTP clients to perform this task.

2

BENQ Corporation