21
1. There are 2 system pre-set accounts. The usernames and passwords for these two
accounts are as follows.
1-1 Username: “admin”; Password: “1111” is for system management account.
This account could not be deleted.
1-2 Username: “net”; Password: “1111” is for normal user account. This
account could be deleted.
2. When login through “admin” account, administrator could operate the function to
setup the other administrator account, or the privilege of the normal user account.
The administrator account could be granted to enter the setup manual, while
normal user account not.
3. The privilege of each account is for remote access, which includes “Monitor”,
“Playback”, and “Dial-in Access”(Access the system through modem).
4. First, choose the “Administrator Account” or “Normal User Account” first.
Set the privilege of “Monitor” and “Playback” on each camera.
Click “Dial-in Access” if you would like to access the system through modem.
[Modify User Account]
Click “Modify” icon to modify user account as screen below.
The operation is the same as the “Add User Account” above.