BenQ Joybook 5000 user manual CD or DVD drive does not function

Models: Joybook 5000

1 40
Download 40 pages 51.17 Kb
Page 34
Image 34

CD or DVD drive does not function.

Please verify the following:

Joybook 5000 is turned on, and the CD or DVD discs are properly inserted in the center of the disk tray in the optical drive.

The DVD disk tray is closed.

Noise from the optical drive when the disc plays shows that the optical drive may be deformed, and Joybook 5000 needs to be repaired. If the disc tray does not open after the eject button is pressed, insert a pin into the Emergency Eject hole near the eject button to force the tray out.

DVD movies do not play.

The region code of the DVD inserted must match that of the DVD playback software. This region code can be set up to five times. If this limit has not been reached, a prompt will appear that will allow you to change the region code of the software to match that of the movie. Otherwise, you can only play back DVDs with the same region code as the last DVD played back successfully.

Unable to use the infrared port of Joybook 5000 to com- municate with other devices.

Please confirm the following:

Communication speeds for Joybook 5000 and the external device are identical.

The infrared port is clear.

There are no objects blocking the path between Joybook 5000 and the external device.

The distance and angle between Joybook 5000 and device do not exceed the effective range of the port.

You are not attempting to establish the link under conditions of direct sunlight.

The infrared port is not facing any other infrared-enabled devices.

There are no incompatibilities between the communications software that is attempting to establish the infrared link and any other com- munications software on Joybook 5000. For further information, please consult the manual for the particular software.

32 Recommendations and Troubleshooting

Page 34
Image 34
BenQ Joybook 5000 user manual CD or DVD drive does not function