9.Tighten the screw that secures the lamp.
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screw.
10.Ensure the handle is fully laid flat and locked in place.
11.Replace the lamp cover on the projector.
12.Tighten the screws that secure the lamp
cover.
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screws.
13.Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
14. After the startup logo, open the | Notice |
| |
Display (OSD) menu. Go to the SYSTEM |
| ||
Reset Lamp Timer? | |||
SETUP: Advanced > Lamp Settings menu. | |||
Press Mode/Enter. The Lamp Settings page | Reset | Cancel | |
displays. Press to highlight Reset lamp | |||
|
| ||
timer and press Mode/Enter. A warning
message displays asking if you want to reset the lamp timer. Highlight Reset and press Mode/Enter. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
