Operation 39

Note that the menu items are available when the projector detects at least one valid signal.

If there is no equipment connected to the projector or no signal detected, limited menu

items are accessible.

Main menu Sub-menu Options
5. SYSTEM SETUP: Advanced
High Altitude
Mode On/Off
Audio Settings
Mute On/Off
Volume
Power On/Off
Ring Tone On/Off
Lamp Settings
Lamp Mode Normal/Economic/SmartEco
ImageCare/SmartEco LampCare
Reset Lamp Timer
Equivalent Lamp
Security
Settings
Change Password
Change Security
Settings Power On Lock
Baud Rate 2400/4800/9600/14400/19200/
38400/57600/115200
Test Pattern On/Off
Closed Caption
Closed Caption
Enable On/Off
Caption Version CC1/CC2/CC3/CC4
Standby
Settings
Network On/Off
Monitor Out On/Off
Audio Pass
Through
Off/Audio in 1/Audio in 2/Audio L/
R/HDMI
Network
Settings
Wired LAN
Status
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
AMX Device
Discovery On/Off
MAC Address
Reset All Settings
6. INFORMATION
Current System Status
• Source
• Picture Mode
• Lamp Mode
• Resolution
• 3D Format
• Color System
• Equivalent Lamp
• Firmware Version