BenQ P51 Converting writing to text, Tap Menu Tools Recognize, Tips for getting good recognition

Converting writing to text

Tap Menu > Tools > Recognize.

If you want to convert only certain words, tap Menu > Draw to disable the Draw mode first. Then select these words and tap Menu > Tools > Recognize. (or tap and hold the selected words and then tap Recognize on the pop-up menu). If a word is not recognised, it is left as writing.

If the conversion is incorrect, you can select different words from a list of alternatives or return to the original writing. To do so, tap and hold the incorrect word (tap one word at a time). On the pop-up menu, tap Alternates. A menu with a list of alternative words appears. Tap the word you want to use, or tap the writing at the top of the menu to return to the original writing.

Tips for getting good recognition:

•Write neatly.

•Write on the lines and draw descenders below the line. Write the cross of the “t” and apostrophes below the

top line so that they are not confused with the word above. Write full stops and commas above the line.

•For better recognition, try increasing the zoom level to 300% using Menu > Zoom.

•Write the letters of a word closely and leave big gaps between words so that the device can easily tell where words begin and end.

•Hyphenated words, foreign words that use special characters such as accents, and some punctuation cannot be converted.

•If you add writing to a word to change it (such as changing a “3” to an “8”) after you attempt to recognise the word, the writing you add will not be included if you attempt to recognise the writing again.

Input methods 25