![](/images/new-backgrounds/1107927/10792713x1.webp)
Safety Instructions (Continued)
7. | Do not place this projector in any of the 8. | Do not block the ventilation holes. |
| following environments. | - Do not place this unit on a blanket, |
| - Space that is poorly ventilated or confined. | bedding or any other soft surface. |
| - Do not cover this unit with a cloth or any | |
| Allow at least 50 cm clearance from walls | |
| and free flow of air around the projector. | other item. |
| - Locations where temperatures may | - Do not place inflammables near the |
| become excessively high, such as the | projector. |
| inside of a car with all windows rolled up. |
|
| - Locations where excessive humidity, dust, |
|
| or cigarette smoke may contaminate |
|
| optical components, shortening the |
|
| projector’s life span and darkening the |
|
| image. |
|
| If the ventilation holes are seriously | |
| obstructed, overheating inside the unit | |
| may result in a fire. | |
9. | Always place the unit on a level, hori- | |
| zontal surface during operation. | |
| - Do not use if tilted at an angle of more | |
- Locations where altitude are higher than | than 10 degrees left to right, nor at angle | |
of more than 15 degrees front to back. | ||
10000 feet. | ||
Using the unit when it is not fully | ||
| ||
| horizontal may cause a malfunction of, or | |
| damage to, the lamp. |
-Locations near fire alarms
-Locations with an ambient temperature above 35°C / 95°F
10.Do not stand the unit on end vertically.
Doing so may cause the unit to fall over, causing injury or resulting in damage to the unit.
Important Safety Instructions | 3 |