Resetting Lamp Hours

If you replace the lamp after 2000 hours of operation, please follow the instructions below within 10 minutes of powering on.

OSD

FUNCTION

Press the Exit button on the projector for 3 seconds to display the total used lamp time.

Press the MENU button on the projector during the lamp hour message. An adjustment message will appear.

Press W or X to reset lamp hours or press EXIT to leave.

Temp Information

When the LED lights up, it is warning you of the following possible problems:

1.The internal temperature is too high.

2.The fans are not working.

Turn off the projector and contact qualified service personnel for further help.

Maintenance 25

Page 29
Image 29
BenQ PB8220, PB8230, PB8120 user manual Temp Information, Resetting Lamp Hours