Remote Control
POWER ON/OFF
Hold this button down for ONE second to turn the projector on. Press this button twice to turn the projector off.
(Refer to pages 18 and 20 for more information.)
Memory (1, 2, 3) buttons
Restores settings saved in memory locations 1, 2 and 3. (Refer to page 25 for more information.)
MENU
Turns the
Picture quality adjustment buttons (Refer to page 22 for more information.)
Notes on Remote Control Operation
Source buttons
Selects an input source to display on the projector. (Refer to page 23 for more information.)
Aspect buttons
Selects the image aspect ratio to suit the input signal. (Refer to page 24 for more information.)
ARROWS (c/e/d/f)
Used to select the desired menu or to make adjustments.(Refer to page 22 for more information.)
ENTER
Opens the selected items of the menu.
(Refer to page 22 for more information.)
EXIT
Exits and saves any changes made using the menu. (Refer to page 22 for
more information.)
LIGHT: Turns the remote control’s backlight on.
Make sure that there is nothing between the remote control and the IR sensor on the projector that might obstruct the infrared beam.
The effective range of the remote control is up to 8 meters from the front of the projector or 8 meters from the rear of the projector. The remote control must be held at an angle within 30 degrees of the projector’s IR remote control sensor.
Overview 13