Safety Instructions (Continued)
8.Do not place this unit in any of the following environments.
-Space where is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free flow of air around the projector.
-Locations where temperatures may become excessively high, such as the inside of a car with all windows rolled up.
-Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the projector’s lifespan and darkening the screen.
-Locations near fire alarms
-Locations with an ambient temperature above 35°C / 95°F
9.Always place the unit on a level, horizontal surface during operation.
-Do not use if tilted at an angle of more than 10 degrees left to right, nor at angle of more than 15 degrees front to back. Using the unit when it is not fully horizontal may cause a malfunction of, or damage to, the lamp or other components.
10. Do not stand the unit on end vertically.
Doing so may cause the unit to fall over, causing injury or resulting in damage to the unit.
11.Do not step on this unit or place any objects upon it.
Besides probable physical damage to the unit, doing so may result in accidents and possible injury.
12.Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply’s wall socket and call BenQ to have the projector serviced.
Moisture Condensation
Never operate the projector immediately after moving it from a cold loaction to a hot location. When the projector is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the projector from possible damage, do not use the projector for at least 2 hours when there is a sudden change in temperature.
Avoid Volatile Liquid
Do not use volatile liquids, such as insecticide or some types of cleaner, near the projector. Do not have rubber or plastic products touching the projector for a long time. They will leave marks on the finish. If cleaning with a chemically saturated cloth, be sure to follow the product’s safety instructions.
Disposal
This product contains the following materials which are harmful to human bodies and environment.
•Lead, which is contained in solder.
•Mercury, which is used in lamp.
To dispose the product or used lamps, consult your local environment authorities for regulations.
8Safety, Regulatory and Legal Information
