BenQ PE8720 manual Copyright, Disclaimer, Safety Instructions, Table of Contents

Models: PE8720

1 10
Download 10 pages 4.78 Kb
Page 2
Image 2
Copyright

DisclaimerCopyright

Copyright 2005 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.

Safety InstructionsDisclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes.

Table of ContentsSafety Instructions

1.Follow the instructions in this guide when installing the projector with this bracket. Improper or inadequate installation could cause the projector to fall and cause injures.

2.Make sure the installation is secure enough to bear the weight of all and withstand vibrations.

3.Use only the parts provided with the bracket, and any parts (commercially available) that are specified in this guide.

4.Do not modify the bracket or the parts provided with the bracket.

5.Do not use damaged parts. If any parts become damaged, contact your dealer.

6.All bolts and screws must be tightened securely.

7.Make sure not to block any ventilation openings when installing the projector.

8.Do not install the projector in a location that is subject to high levels of dust or humidity.

9.Do not install the projector in a location that is exposed to direct sunlight or in a location that is subject to extreme fluctuations in temperature (such as near an air conditioner).

10.Clean only with a dry cloth.

11.Special techniques and experience are required when installing the projector with this bracket. It is recommended that you contact your dealer to install the projector for you.

12.Once the projector is installed, safety checks should be conducted on a regular basis.

Table of Contents

 

Packing Parts List

3

Projector Installation and Throw Distance Chart

4

Installing a Projector with the Ceiling Bracket

5

Adjusting the Ceiling Bracket

8

Specifications and Diagrams

10

2 Copyright

Page 2
Image 2
BenQ PE8720 manual Copyright, Disclaimer, Safety Instructions, Table of Contents