37
Operation
English
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speakers. Be sure you have made a
correct connection to the projector audio input. See "Connection" on page 16 for how the audio input is
connected.

Muting the sound

To temporarily turn off the sound,
• Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is off, the screen will
display in the upper right corner of the screen.
To restore the sound, press MUTE again.
•Using the OSD menu
1. Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced
menu is highlighted.
2. Press to highlight Audio Settings and press ENTER. The Audio Settings page is
displayed.
3. Highlight Mute and press / to select On.
4. To restore the sound, repeat steps 1-3 and press / to select Off.

Adjusting the sound level

To adjust the sound level,
1. Repeat steps 1-2 above.
2. Press to highlight Volume and press / to select a desired sound level.

Turning off the Power on/off ring tone

To turn off the ring tone,
1. Repeat steps 1-2 above.
2. Press to highlight Power on/off ring tone and press / to select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute or
changing the sound level will not affect the Power on/off ring tone.