Bernina 135 S appendix Sewing table, Free-Hand-System FHS presser foot lifter* knee-operated

Setting up the sewing computer 11

Sewing table

Increases the sewing surface.

To attach

• raise the needle and presser foot

• place the table over the free arm and press firmly so that it engages on the fixing cam

To remove

•raise the needle and presser foot

•pull the table out of the fixing cam

•pull in horizontal position to the left

Scale

•«0» corresponds to the centre needle position

Seam guide

•insert into the groove (under- side of table) from the right or left

•it can be freely adjusted over the whole width of the table Note: Remove the presser foot when attaching the seam guide!

Free-Hand-System (FHS) presser foot lifter* (knee-operated)

Attaching the presser foot lifter

Insert into the opening in the base plate: you should be able to operate the lifter with your knee in your normal sitting position.

Note:

The presser foot lifter raises and lowers the presser foot

•push to the right

•the presser foot is raised

•the feed-dog is lowered simultaneously

•the feed-dog is raised as soon as the first stitch is sewn

Your dealer can adjust it if	* Special accessory can vary from
necessary.	country to country

030529.52.04_0303_a135 a145_EN