Bernina V29.39.00 Thread breakage hint, Problem with Foot #57D and straight stitch compatibility

Models: V29.39.00

1 14

Page 7

If the thread breaks, press the threading button to open the thread tension and remove the th- read. Rethread the normal way.

Select stitch #1, attach and select the foot #57D (Patchworkfoot with guide). Open the securing function and select the straight stitch plate.

Now, it is possible to start the sewing process, without the warning message appearing:

7/14, 04.11.2009

Image 7

Contents

Bernina Important points Sewing UpdatesEmbroidery Updates Bernina 830 only Software Version General ChangesDisplay of data version number Software VersionGeneral Changes Language Finnish integratedThread tension for the underlay segments buttonholes Sewing UpdatesManual threading Thread cutting without fabric movement Use of straight stitch feet with thread cuttingManual winding of the lower bobbin thread Reset of back stepping history Winding indicator during sewing/embroideryThread breakage hint Problem with Foot #57D and straight stitch compatibilityInformation Foot #2a corrected Tension changed for the tie on stitches Pattern #169 improvedUpper thread detection changed Start of embroidery Embroidery Updates Bernina 830 onlyUsing zoom option with panning Using Foot #44C The new CutWork & Echo quilting footThread tension can be changed to a minimum Manual tie on for embroidery Stop for manual cutting can be switched offHoop calibration Stitching without thread, is displayed in embroidery modeFeedback issues Important points