PERFORMANCE CHECKLlST

All burners are tested before leaving the factory. There are no adjustments for the burners if connected according to the information on the rating plate. Check each burner for proper operations. Flames should be blue in all settings. If service is required, contact your dealer for the name of their authorized service agency. Gas conversions and initial installation are not the responsibility of the manufacturer.

The installer should carry out the following performance checks. Refer to instructions below.

1.Check surface burner ignition.

2.Check air shutter adjustment (only for oven and broiler burner)- sharp blue flame, no yellow tipping, sooting or flame lifting

3.Check low flame adjustment

4.Check broiler and oven ignition - all burner ports.

5.Check for gas leaks (odors) at all gas connections.

6.Check oven bake and convection bake function.

FINAL PREPARATION

1.Some stainless steel parts may have a plastic protective wrap which must be removed. The interior of the oven should be washed thoroughly with hot soapy water to remove film residues and any installation dust or debris before using it for food preparation, then rinsed and wiped dry. Solutions stronger than soap and water are rarely needed.

2.All stainless steel body parts should be wiped with hot, soapy water and with a liquid cleaner recommended for use with stainless steel If buildup occurs, do not use steel wool, abrasive cloths, cleaners, or powders! If it is necessary to scrape stainless steel to remove encrusted materials, soak with hot, wet cloths to loosen the material, then use a wood or nylon scraper. Do not use a metal knife, spatula, or any other metal tool to scrape stainless steel! Scratches are almost impossible to remove.

NOTE: These installation instructions should remain with the unit for future reference. The electrical diagram is located in the backside or the appliance.

REPLACEMENT PARTS

Only authorized replacement parts may be used in performing service on the appliance. Replacement parts are available from factory authorized parts distributors.

Conversion to different types of gas

Before carrying out any maintenance work, disconnect the appliance from the gas and electric supply. For Natural Gas fit regulator assembly described in Fig.

Adaptation of the pressure regulator for use with different type of gas

The pressure regulator supplied with the appliance is a convertible type pressure regulator for use with Natural Gas at a nominal outlet pressure of 4” w.c. or LP gas at a nominal outlet pressure of 11” w.c. and it is pre-arranged from the factory to operate with one of these gas/pressure as indicated in the labels affixed on the appliance, package and Instruction booklet.

To convert the regulator for use with other types of gas follow these instructions:

1)Unscrew by hand the upper metal stopper of the regulator.

2)Unscrew by hand the white plastic piece screwed under the above mentioned metal stopper, afterward screw it again in opposite way under the metal stopper (for gas reference see the written “LP” and “NAT” with relative indicating arrows on the white piece).

3)Screw again by hand the metal stopper in the original position on the regulator.

Following these exact instructions the gas regulator is converted for use with the other gas/pressure.

It is essential that the gasket and the pressure test point stopper are properly installed to avoid gas leakage

12

Page 11 Page 13
Page 12
Image 12
Bertazzoni H366GGVVI, H366GGVNE, H366GGVCR manual Performance CHECKLlST, Replacement Parts
Page 11 Page 13

H366GGVCR, H366GGVNE, H366GGVVI specifications

Bertazzoni, an esteemed name in the world of kitchen appliances, has long been synonymous with quality, innovation, and exceptional design. Among its various offerings, the H366GGVVI, H366GGVNE, and H366GGVCR models stand out as premium ranges that elevate the cooking experience. These models are part of Bertazzoni's Heritage series, which blends modern engineering with Italian craftsmanship, providing a perfect fusion of performance and aesthetics.

The H366GGVVI, H366GGVNE, and H366GGVCR each feature a 36-inch width, providing ample cooking space for culinary enthusiasts. These models come equipped with six powerful burners, each designed to accommodate a range of cooking styles and techniques. The burners offer precise temperature control, allowing users to simmer delicate sauces or achieve high heat for searing. The dual-ring burner feature enhances versatility, enabling chefs to switch easily between intense heat and more gentle cooking.

Each range includes an electric oven with a generous cooking capacity, featuring multiple cooking modes such as convection and broil. The convection mode ensures even heat distribution, making it ideal for baking and roasting. With a self-cleaning option, maintaining the oven's cleanliness is effortless, adding convenience to the cooking experience.

In terms of design, the H366GGVVI, H366GGVNE, and H366GGVCR showcase the hallmark Italian style Bertazzoni is known for. With sleek lines, professional knobs, and a variety of finishes available, including stainless steel, these ranges add a touch of sophistication to any kitchen. The design elements are not only aesthetically pleasing but also functional, with ergonomically designed knobs for easy operation.

Another notable characteristic is the integration of advanced safety features. These models are equipped with flame failure devices that automatically shut off the gas supply if a flame goes out, ensuring peace of mind while cooking.

In conclusion, the Bertazzoni H366GGVVI, H366GGVNE, and H366GGVCR range cookers exemplify the brand's commitment to quality and innovation. They offer a perfect blend of power, precision, and elegant design. Whether you are a home cook or a culinary professional, these ranges provide the tools needed to create exceptional meals while enhancing the beauty of your kitchen space.
Top Page Image Contents