WARNING

Read this instruction booklet before installing and using the appliance.

The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance.

The manufacturer reserves the right to make changes to its products when considered necessary and useful, without affecting the essential safety and operating characteristics.

This appliance has been designed for non-professional, domestic use only.

Warning: do not use this appliance to heat a room.

Warning: do not place any pot or pan on the open oven door. The door is made of glass and it can break if loaded with a weight.

Warning: this appliance must be used only with base feet properly installed. See installation instruction for details.

Installation instructions

This appliance shall only be installed by an authorized person. This appliance shall be installed in accordance with the manufacturer’s installation instructions, IMPORTANT: this appliance must be installed in accordance with the norms & standards of the country where it will be installed.

The installation of this appliance must conform to local codes and ordinances. In the absence of local codes, Installations must conforms to American National Standards, National Fuel Gas Code ANSI Z223.1 – latest edition** or B149.1.

If local codes permit, a flexible metal appliance connection with the new AGA or CGA certified design, max. 5 feet (1,5 m) long, ½” I.D. is recommended for connecting this appliance to the gas supply line. Do not bend or damage the flexible connector when moving the appliance. The pressure regulator has ½” female pipe thread. The appropriate fitting must be determined based on the size of your gas supply line, the flexible metal connector and the shutoff valve.

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70.

The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

For use with a pressure regulator. The regulator supplied must be used with this appliance; it shall be properly installed in order to be accessible when appliance is installed in its final location.

The gas appliance pressure regulator must be set for the gas with which the appliance is used.

This appliance can be used with Natural Gas and LP Gas. It is shipped from the factory adjusted for use with Natural Gas: CONVERSION FIXED ORIFICES ARE LOCATED IN THE LITERATURE PACK SUPPLIED WITH THE UNIT.

A gas nozzle kit for the change of type of gas are contained inside the package together with the gas appliance installation kit and instruction booklet.

The maximum inlet gas supply pressure incoming to the gas appliance pressure regulator is 20’’ water column (5 kPa) .

The minimum gas supply pressure for checking the regulator setting shall be at least 1“ w.c. (249 Pa) above the inlet specified manifold pressure to the appliance (this operating pressure is 4” w.c. (1.00 kPa) for Natural Gas and 11” w.c. (2.75 kPa for LP Gas).

All opening and holes in the wall and floor, back and under the appliance shall be sealed before installation of the appliance.

It’s always compulsory to install the riser even for an island installation

3

Page 2 Page 4
Page 3
Image 3
Bertazzoni H366GGVVI, H366GGVNE, H366GGVCR manual Installation instructions
Page 2 Page 4

H366GGVCR, H366GGVNE, H366GGVVI specifications

Bertazzoni, an esteemed name in the world of kitchen appliances, has long been synonymous with quality, innovation, and exceptional design. Among its various offerings, the H366GGVVI, H366GGVNE, and H366GGVCR models stand out as premium ranges that elevate the cooking experience. These models are part of Bertazzoni's Heritage series, which blends modern engineering with Italian craftsmanship, providing a perfect fusion of performance and aesthetics.

The H366GGVVI, H366GGVNE, and H366GGVCR each feature a 36-inch width, providing ample cooking space for culinary enthusiasts. These models come equipped with six powerful burners, each designed to accommodate a range of cooking styles and techniques. The burners offer precise temperature control, allowing users to simmer delicate sauces or achieve high heat for searing. The dual-ring burner feature enhances versatility, enabling chefs to switch easily between intense heat and more gentle cooking.

Each range includes an electric oven with a generous cooking capacity, featuring multiple cooking modes such as convection and broil. The convection mode ensures even heat distribution, making it ideal for baking and roasting. With a self-cleaning option, maintaining the oven's cleanliness is effortless, adding convenience to the cooking experience.

In terms of design, the H366GGVVI, H366GGVNE, and H366GGVCR showcase the hallmark Italian style Bertazzoni is known for. With sleek lines, professional knobs, and a variety of finishes available, including stainless steel, these ranges add a touch of sophistication to any kitchen. The design elements are not only aesthetically pleasing but also functional, with ergonomically designed knobs for easy operation.

Another notable characteristic is the integration of advanced safety features. These models are equipped with flame failure devices that automatically shut off the gas supply if a flame goes out, ensuring peace of mind while cooking.

In conclusion, the Bertazzoni H366GGVVI, H366GGVNE, and H366GGVCR range cookers exemplify the brand's commitment to quality and innovation. They offer a perfect blend of power, precision, and elegant design. Whether you are a home cook or a culinary professional, these ranges provide the tools needed to create exceptional meals while enhancing the beauty of your kitchen space.
Top Page Image Contents