I |
LIGHTING ASSEMBLY AND REPLACEMENT
SPOTLIGHT
How to replace a square halogen light:
a)Check that the equipment is disconnected from the power supply.
b)Open the panel completely till 90° (see figure) pressing the PUSH button.
c)Replace the lamp with a similar one (halogen, max 20W, 12 Volt, G4 connection).
d)Close the panel. If the panel does not close correctly repeat the operation at point b.
L |
MAINTENANCE AND CLEANING
Constant maintenance ensures the correct operation and efficiency of the appli- ance over time. Special attention should be paid to the metal
1. METAL GREASE-TRAPPING FILTERS
These trap the fat and grease particles suspended in the air, and therefore should be washed every month in hot water and detergent, without bend- ing them. Wait until they are completely dry before repositioning them.
To remove and replace these filters, see the instructions in point H1. This operation should be performed at regular intervals.
3. CLEANING THE OUTSIDE OF THE APPLIANCE
The ouside of the range hhod should be cleaned using a damp cloth and neutral liquid detergent or denatured alcohol.
In case of
Keep these instructions together with the instructions for use of your hood. The manufacturer accepts no liability for any damage caused by
10