Bertazzoni dimensions Models X244GGVX

Follow the instructions below to change the oven burner nozzle:

1)Remove the oven level (Fig. 9).

2)Loosen the screw V and pull out the burner from the support being careful not to damage the ignition plug and the thermocouple (Fig. 10).

3)Unscrew the nozzle R (Fig. 10) using a 7 mm spanner and replace it with the nozzle needed for the new type of gas according to what is indicated in Table below

4)Re-install all the parts in revers sequence from 3 to 1

(Fig. 9) (Fig. 10)

Follow the instructions below to change the broiler burner nozzle:

1)Loosen the screw and pull out the burner from the support being careful not to damage the ignition plug and the thermocouple (Fig. 11).

2)Unscrew the nozzle R (Fig. 11) using a 7 mm spanner and replace it with the nozzle needed for the new type of gas according to what is indicated in Table below.

Models X244GGVX			[MLS0GTU4X(2 or 5)A]
Adapting to different types of gas
Burner	Position	Injector	Gas	Pressure	Max Rate		Min Rate		By-pass
		diam. [mm.]	Type	[i.w.c.]	[BTU/h]	[W]	[BTU/h]	[W]	diam. [mm]
Auxiliary	Rear L	0,90	NG	4”	3400	996	900	264	Regulated
		0,54	LP (Propane)	11”	3400	996	900	264	0,29
Semi-Rapid	Front R	1,18	NG	4”	6100	1787	1500	439	Regulated
		0,70	LP (Propane)	11”	6100	1787	1500	439	0,36
Rapid	Rear R	1,55	NG	4”	10400	3047	2500	732	Regulated
		0,92	LP (Propane)	11”	10400	3047	2500	732	0,47
Dual Burner	Front L Inner	0,80	NG	4”	2800	820	900	264	Regulated
		0,49	LP (Propane)	11”	2800	820	900	264	0,29
	Front L Outer	N°2 x 1,15	NG	4”	12000	3516	4500	1318	Regulated
		N°2 x 0,70	LP (Propane)	11”	12000	3516	4500	1318	0,65
Oven	Oven	1,60	NG	4”	11000	3223	2400	703	Regulated
	downside	0,95	LP (Propane)	11”	11000	3223	2400	703	0,48
Broiler	Oven	1,50	NG	4”	10000	2930	Only Max	Only Max	No by-pass
	upside	0,90	LP (Propane)	11”	10000	2930	Only Max	Only Max	No by-pass

CAUTION: save the orifices removed from the appliance for future use

12