OPERATION

 

 

 

 

 

 

 

 

 

LIGHT

 

 

BLOWER

 

 

 

 

Controls

 

 

MEDIUM

SWITCH

 

 

SPEED

 

 

 

The hood is operated using the (4) push-but-

 

 

 

BLOWER

 

 

BLOWER

 

tons located at eye-level, on the front edge of

 

ON-LOW /

 

HIGH

 

 

SPEED

the hood.

 

 

 

OFF

 

 

 

 

 

 

PILOT

 

 

 

SWITCH

 

 

The light switch turns the halogen lights on

 

 

 

 

 

 

 

LAMP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and off.

 

 

 

 

 

 

 

 

 

The blower on-low / off switch turns the blower

on to its lowest running speed. The blower 0 must be turned on using this switch. Turn the

blower off by pressing this switch a second time.

The blower medium speed switch changes the blower speed to medium. This switch works only if the blower is already running at low or high speed.

The blower high speed switch changes the blower speed to high. This switch works only if the blower is already running at low or medium speed.

The pilot lamp lights up whenever the blower is on.

Heat SentryTM

Your hood is equipped with a HEAT SENTRY™ thermostat. This thermostat is a device that will turn on or speed up the blower if it senses excessive heat above the cooking surface.

1)If blower is OFF - it turns blower ON to HIGH speed.

2)If blower is ON at a lower speed setting - it turns blower up to HIGH speed. When the temperature level drops to normal, the blower will return to its original setting.

WARNING

The HEAT SENTRY thermostat can start the blower even if the hood is turned OFF. When this occurs, it is impossible to turn the blower OFF with its switch. If you must stop the blower, do it from the main electrical panel.

HALOGEN BULBS

This range hood requires two or four halogen bulbs (Type JC, 12V, 20W, G4 Base).

To change bulbs:

1.Open the light lens by grasping the tab on the lens and rotating lens downward.

2.Remove the bulb by pulling sideward (Do not rotate). CAUTION: BULB MAY BE HOT!

3.Do not touch replacement bulb with bare hands! Push bulb securely into lamp socket and snap lens closed.

-4 -

LIGHT LENS

TAB