1.6Setting the Gain
First adjust the gain of your transmitter (only TS 100; refer to chapter 3.3). Once the transmitter gain is optimised, it is necessary to match the receiver’s output gain to your mixing console or PA system. Adjust the gain control (5). Setting the gain too high may cause distor- tion.
1.7Mounting NE 100 into ZTE 100/200 Mounting Bracket
NE 100 | NE 100 |
ZTE 100/200ZTE 100/200
Illustration 1 | Illustration 2 |
•For mounting the NE 100 receiver into the ZTE 100/200 mounting bracket the NE 100 has one hole on the right and on the left side at the bottom.
•The NE 100 can be mounted into the ZTE 100/200 in two ways.
•If the receiver is to be mounted further to the back refer to illustration 1.
•If the receiver is to be mounted further to the front refer to illustration 2.
•The ZTE 100/200 is supplied with 2 screws for mounting the NE 100 into the ZTE 100/200 and 4 screws for
18