Billion Electric Company BIPAC-2AB 2.0 user manual Front Panel LEDs, Using BIPAC-2AB

Chapter 2 Using BIPAC-2AB 2.0

FIGURE 2: CONNECTING THE BIPAC-2AB 2.0

4.The BIPAC-2AB 2.0 ISDN a/b adaptor will run a Power-Onself- diagnostic test. The LEDs on the front panel will blink on and off one by one and the connected analog telephones will ring.

The Front Panel LEDs

The following illustration and table describe the front panel LEDs:

	FIGURE 3: THE FRONT PANEL LEDS
LED	Meaning
PWR	When lit it indicates AC power is connected.
RUN	Flashes periodically to indicate that the BIPAC-2AB 2.0
	is working properly.
ISDN	When lit it indicates that the ISDN S0 bus is activated.
B1	When lit it indicates that the ISDN “B1” channel is
	being accessed. It will flash during data transfer.
B2	When lit it indicates that the ISDN “B2” channel is
	being accessed. It will flash during data transfer.
	When lit it indicates that the analog device connected to
	the Phone 1 port is in use.
	When lit it indicates that the analog device connected to
	the Phone 2 port is in use.

5