440140 PARKING BRAKE KIT
ASSEMBLY
To install parking brake, first install the bushings (item #3) into the rear holes located on the base next to the rear wheels (see figure below). Next place a washer (item #2) on the fork shaft, against the stop washer. Then gently push shaft through the bushings and hole until it rests against stop washer. Finally place pal nut (item #4) on opposing end. To install stop bolt, place washer face nut (item #6) on screwcap (item #5) until nut reaches the end of the threads. Next insert the screwcap into the hole located in front of the brake and use the nut lock (item #7) on the interior and tighten it.
Parts List
|
|
| Part No. | Description | Qty | |
|
| 1 | 440143 | ROD BRAKE WA | 1 | |
|
| 2 | 8172011 | WASHER 1/2 SAE | 1 | |
5 | 6 | 3 | 500130 | BUSHING SHIFTER | 2 | |
4 | 840089 | NUT PAL 1/2 | 1 | |||
1 | 3 | |||||
5 | 8041012 | SCREWCAP | 1 | |||
|
| 6 | 900453 | NUT LOCK | 1 | |
|
| 7 | 8160001 | NUT LOCK | 1 | |
2 |
| 4 | 440140 | PARKING BRAKE KIT | 1 | |
| 7 |
|
|
| ||
|
|
|
|
|
To apply parking brake, simply rotate forks to till they rest against the back end of the tire. Place once foot on top fork and gently put downward pressure on the fork while carefully pushing unit forward. The forward motion of the tire will help to roll the forks into a fixed position. To remove from braking position pull unit backwards rotating the tire, which will rotate the forks away from locked position on wheel.
Part No 440144 | - 2 - | Form No F051106A |
