HW Owner’s Manual
PACKING CHECKLIST
Your Billy Goat HW Mower is shipped from the factory in one carton, completely assembled except for the upper handle.
READ all safety instructions before assembling unit.
TAKE CAUTION when removing the unit from the box the Handle Assembly is attached and folded over
PUT OIL IN ENGINE BEFORE STARTING
PARTS BAG &
LITERATURE ASSY
Warranty card P/N- 400972, Owner’s Manual
Boxing Parts
Checklist
Kawasaki 6HP
Literature Assy
ASSEMBLY
1.REMOVE unit from carton and allow upper handle (item 7) to lay on ground behind unit.
2.REMOVE hardware items 8, 71, 78, 87, 96, & 97 from temporary storage positions on lower handles (items 10).
3.ATTACH lower handle (item 10) to the main frame using hardware (items 71, 78, & 96) removed from the previous step (see figure above).
4.ATTACH upper handle to lower as shown in page 14, and securely tighten all fasteners.
Note: Be sure the engine starter rope is properly installed in the starter rope guide (item 8) before tightening the corresponding fasteners (see figure above).
5. CONNECT spark plug wire to spark plug.
Part No 510267 | 8 | Form No F070506A |