9GENERAL SAFETY

For your safety and the safety of others, these directions should be followed:

Do not operate this machine without first reading owner's manual and engine manufacturer's manual.

Use of Ear Protection is recommended while operating this machine.

Use of Eye and Breathing protection is recom- mended when using this machine.

·DO NOT place hands or feet beneath cutting deck, near debris outlet or near any moving parts.

·DO NOT start engine or operate unit with bystanders in or near the work area.

·DO NOT start or operate machine with blade or drive clutch engaged.

·DO NOT operate during excessive vibration.

·DO NOT perform any maintenance or inspection until engine has been turned off and has come to a complete stop, and the spark plug has been removed

·DO NOT operate machine with guards removed.

·DO NOT use this machine for cutting areas containing rock, glass, string like material, wire, rags, cans, metal, or other non- organic material.

·DO NOT operate this machine on slopes greater than specified on page 1.

·DO NOT operate machine near any hot or burning debris, or any toxic or explosive material.

·DO NOT allow children to operate this equipment.

10ASSEMBLY

Read all safety and operating instructions before assembling or starting this unit.

PUT OIL IN ENGINE BEFORE STARTING.

DISCONNECT SPARK PLUG WIRE

BEFORE ASSEMBLING UNIT.

Your Billy Goat Brush Cutter is shipped from the factory in one carton, completely assembled except for the upper handle, and front guard bar.

1.REMOVE unit from carton and allow upper handle (item 40) to lay on ground behind unit. Set guard bar(Item 31) to the side for now.

2.REMOVE hardware items 115, 117, 141, 143, & 144 from temporary storage positions on lower handle (items 51, & 52).

3.ATTACH upper handle to lower as shown below, and securely tighten all fasteners. For easy alignment of handles during installation, loosen the four screws that secure the lower handles. Line up and hand tighten all handle hardware before final tightening. Note: Be sure the engine starter rope is properly installed in the starter rope guide (item 145) before tightening the corresponding fasteners.

4.REMOVE hardware items 102, 103, 117, 119, 124, 141, & 152 from temporary storage positions on deck and skid assy at front of unit (items 2, 155, & 156)

5.ATTACH guard bar(Item 31) to deck as shown below. Install the center bolts(Item 153) first, and install the bolts that fasten through the sides of the deck last. Securely tighten all fasteners. Note: Hardware items 117, 119, & 141 are used to secure both the front skid attachment and the sides of the guard bar. Be sure both are securely attached.

6.CONNECT spark plug wire to spark plug.

11PACKING CHECKLIST

These items should be included in your carton. If any of these parts are missing, contact your dealer.

Literature

Assy

Engine

Manual

Per Model

Check

Handle Upper Assembly 500256

Check

Bar Support WA 500235

Check

Literature Assy 500263

Check

Briggs & Stratton

Check

Honda(English)

Check

Honda W/Electric

Start (English)

Part No. 500264

Page 3 of 12

Form No. F051903A

Page 2 Page 4
Page 3
Image 3
Billy Goat BC2401IC, BC2402HE owner manual Disconnect Spark Plug Wire Before Assembling Unit
Page 2 Page 4

BC2402HE, BC2401IC, BC2402H specifications

The Billy Goat BC2402H, BC2401IC, and BC2402HE are part of Billy Goat's impressive lineup of brush mowers designed for superior performance and reliability, making them ideal for both commercial and residential use. Each model, though distinct, shares core features and innovations that elevate their capabilities in tackling tough overgrown terrains.

The BC2402H is equipped with a robust Honda engine, providing reliable power and enhanced performance. This model features a heavy-duty, all-steel construction that ensures durability even in challenging conditions. Its 24-inch cutting deck, along with a dual-blade system, allows for efficient cutting and mulching, significantly reducing the time needed to clear large areas. The BC2402H also boasts a self-propelled drive system with variable speed, enabling operators to adjust the speed according to the terrain, thereby enhancing maneuverability.

Moving on to the BC2401IC, this model distinguishes itself with its innovative control features, designed for ease of use. The integrated control system allows for smooth operation, providing users with better handling and reduced fatigue during extended periods of use. Its lightweight design makes it easy to maneuver in tight spaces while still delivering the robust cutting power required for thick brush and weeds. The BC2401IC retains the signature Billy Goat durability, constructed to withstand the rigors of heavy-duty landscaping tasks.

The BC2402HE is a step further in technology and efficiency, featuring enhanced ergonomics and a powerful engine that ensures top-tier performance. This model focuses on user comfort, incorporating an adjustable handle and vibration dampening technology, which minimizes operator fatigue during lengthy jobs. The BC2402HE also excels in versatility, with adjustable height settings that accommodate various cutting needs, allowing for everything from fine trimming to tackling dense undergrowth.

In summary, the Billy Goat BC2402H, BC2401IC, and BC2402HE represent the pinnacle of brush mowing technology. With powerful engines, durable construction, and user-friendly features, these models are designed to meet the demands of both professional landscapers and homeowners. Their ability to efficiently clear overgrown areas while providing optimal comfort and control makes them indispensable tools for anyone looking to maintain their outdoor spaces effectively. Whether you’re dealing with thick brush or just need regular lawn maintenance, these models offer the solutions you need to get the job done right.
Top Page Image Contents