Operation, Propulsion, Handling & Transporting

16OPERATION continued

16.3PROPULSION

This Brush Cutter is self-propelled, and is controlled by an operator presence control. To engage the wheel drive, lift the operator's right hand control lever against operator's handle. The drive is disengaged by releasing this lever.(See Fig. 1.2)

GROUND SPEED can be varied by selecting a higher or lower gear using the gear shift lever at the rear of the machine(See Fig. 2), or by changing the engine rpm. To shift the Brush Cutter into reverse, release all controls and rotate the shift lever to the left, when the lever stops lift it up and continue to turn it to the left until it stops again.

Under most conditions cutting should be done in first or second gear. Third gear should be reserved for conditions where weeds and brush are thinned out or not as tall. The quality of the cut produced is directly related to the unit's ground speed during cutting. If the quality of the cut is not satisfactory (i.e. material left standing) you should shift into a lower gear during cutting. For improved control in confined areas, this machine can be pushed forward or backward by releasing the operator's clutch lever, placing the transaxle in neutral, and pushing the machine.

Lever Up

HandleEngages

Clutch

Lever

Fig. 1.2

16.5HANDLING & TRANSPORTING:

Using three people to lift machine is recommended. Lift holding the handle and front guard for deck. Secure in place during transport.

Never lift the unit with the engine running.

16.6STORAGE

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Be sure engine is cool. Do not smoke. Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Run engine until fuel tank is empty and engine runs out of gasoline.

NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on stabilizer container. Run engine at least 10 min. after adding stabilizer to allow it to reach the carburetor.

CAUTION: Wheels must be chocked or blocked when unit is parked on a slope.

SHIFT LEVER

R N 1 2 3

16.4CUTTING HEIGHT ADJUSTMENT

Cutting height can be adjusted to allow a 1” lower cutting height. This is particularly useful for cutting grasses that lay over when over grown. (i.e. Bermuda, Johnson, etc.)

Fig. 2

Note: When cutting brush and normal field grasses it is strongly recommended that you operate your brush cutter at the standard (top) cutting height.

Part No. 500264

Page 9 of 12

Form No. F051903A

BC2402HE, BC2401IC, BC2402H specifications

The Billy Goat BC2402H, BC2401IC, and BC2402HE are part of Billy Goat's impressive lineup of brush mowers designed for superior performance and reliability, making them ideal for both commercial and residential use. Each model, though distinct, shares core features and innovations that elevate their capabilities in tackling tough overgrown terrains.

The BC2402H is equipped with a robust Honda engine, providing reliable power and enhanced performance. This model features a heavy-duty, all-steel construction that ensures durability even in challenging conditions. Its 24-inch cutting deck, along with a dual-blade system, allows for efficient cutting and mulching, significantly reducing the time needed to clear large areas. The BC2402H also boasts a self-propelled drive system with variable speed, enabling operators to adjust the speed according to the terrain, thereby enhancing maneuverability.

Moving on to the BC2401IC, this model distinguishes itself with its innovative control features, designed for ease of use. The integrated control system allows for smooth operation, providing users with better handling and reduced fatigue during extended periods of use. Its lightweight design makes it easy to maneuver in tight spaces while still delivering the robust cutting power required for thick brush and weeds. The BC2401IC retains the signature Billy Goat durability, constructed to withstand the rigors of heavy-duty landscaping tasks.

The BC2402HE is a step further in technology and efficiency, featuring enhanced ergonomics and a powerful engine that ensures top-tier performance. This model focuses on user comfort, incorporating an adjustable handle and vibration dampening technology, which minimizes operator fatigue during lengthy jobs. The BC2402HE also excels in versatility, with adjustable height settings that accommodate various cutting needs, allowing for everything from fine trimming to tackling dense undergrowth.

In summary, the Billy Goat BC2402H, BC2401IC, and BC2402HE represent the pinnacle of brush mowing technology. With powerful engines, durable construction, and user-friendly features, these models are designed to meet the demands of both professional landscapers and homeowners. Their ability to efficiently clear overgrown areas while providing optimal comfort and control makes them indispensable tools for anyone looking to maintain their outdoor spaces effectively. Whether you’re dealing with thick brush or just need regular lawn maintenance, these models offer the solutions you need to get the job done right.

Billy Goat BC2401IC, BC2402HE Operation, Propulsion, Handling & Transporting, Storage

Models: BC2402HE BC2401IC BC2402H