Billy Goat BC2403 Series owner manual Operation

Models: BC2403 Series

1 36
Download 36 pages 9.98 Kb
Page 10
Image 10
OPERATION

BC2403 Series Brush Cutter Owner’s Manual

OPERATION

DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly fatal poison.

DO NOT start or operate engine if strong odor of gasoline is present.

DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated.

DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.

DO NOT touch muffler, cylinder or cooling fins while engine is running. Contact with hot surfaces may cause severe burns.

DO NOT operate equipment with bystanders in or near the work area.

DO NOT operate equipment with guards removed.

DO NOT operate equipment in areas containing rock, glass, string-like material, wire, rags, cans, metal or other non-organic material.

DO NOT operate equipment on slopes greater than specified in Specifications section of this manual.

DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.

DO NOT allow children to operate this equipment.

ALWAYS keep hands and feet away from moving or rotating parts.

ALWAYS check before use, transportation, or storage to make sure the battery is secured and straps holding battery are in good condition. If the strap breaks it will allow the battery to shift and could cause a short damaging the equipment. (Electric start)

ALWAYS connect battery terminals to proper connection cables. (Electric Start)

EAR PROTECTION is recommended when operating this equipment.

EYE PROTECTION is recommended when operating this equipment.

Part No 500360

10

F050208A

Page 10
Image 10
Billy Goat BC2403 Series owner manual Operation