Billy Goat TR1303H, HTR1601V, TR1103 Handling & Transporting, Storage, OPERATION continued

16OPERATION continued

16.4HANDLING & TRANSPORTING:

ALWAYS REMOVE LOADER FROM TAILGATE OR MOUNT-

ING BEFORE TRANSPORTING OR OPENING TAILGATE.

Using two people to lift machine is recommended. Lift holding the rear handle and front of frame. Secure in place during transport.

HOSE: DO NOT drag the hose with vehicle.

16.5STORAGE

Turn fuel supply off when unit is not in use.

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Be sure engine is cool. Do not smoke. Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Run engine until fuel tank is empty and engine runs out of gasoline.

NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on stabilizer container. Run engine at least 10 min. after adding stabilizer to allow it to reach the carburetor.

HOSE STORAGE: Storing hose in a covered area, out of sunlight and heat will prolong hose life. Do not store hose where it could be stepped on or where other objects could crush or damage hose.

	Page 7 of 12
Part No. 811126	Form No. F021602B