16 OPERATION continued

Side Discharge Down Position

This position directs the air stream down at the ground to allow the operator to deliver the maximum power to debris that is stuck or difficult to remove. This position is also very useful for cleaning out cracks and expansion joints in pavement.

16.4ADJUSTING AIR DIRECTOR

When you lock the lever, the default position of air director is in the middle or straight out. If you want to raise or lower air director lock position you must adjust the threaded fitting on the cable.

Note: You will not get full range of motion of air director If you raise or lower default locking postion.

Raise Lock Position

1. Lock the air director in place at the handle by pulling on the lever then slide it over to right.

2. Loosen the top nut on the threaded cable fitting until the air director position is satisfactory.

3. Tighten the bottom nut.

Front Discharge Position

The removable front discharge adapter can be slipped on to direct the air stream forward. This option is extremely useful for cleaning out long cracks in pave- ment or for cleaning under bushes or building over- hangs.

Lower Lock Position

1. Lock the lever at the handle by pulling on the lever then slide it over to right.

2. Loosen the bottom nut on the threaded cable fitting and back it off 1/4 inch.

3. Pull the threaded cable fitting up while pushing down on the air director then check for air director position.

4.Loosen or tighten the same bottom nut then repeat step 3 until the air director position is satisfactory.

5.Tighten the top nut.

16.5STORAGE

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Be sure engine is cool. Do not smoke. Run engine until fuel tank is empty and engine runs out of gasoline.

NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on stabilizer container. Run engine at least 10 min. after adding stabilizer to allow it to reach the carburetor.

Part No. 430316

Page 6 of 12

Form No. F012203A

Page 5 Page 7
Page 6
Image 6
Billy Goat QB1004, QB884H, QB1304H, QB994S, QB654, QB1304HBW, QB554HC Operation, Side Discharge Down Position, Storage
Page 5 Page 7

QB1004, QB884H, QB1304H, QB994S, QB654, QB1304HBW, QB554HC specifications

The world of outdoor power equipment has seen significant advancements over the years, and among the standout products in this domain are the Billy Goat lineup of blowers and vacuums. Including models such as the QB1004, QB884H, QB1304H, QB994S, QB654, QB1304HBW, and QB554HC, this collection showcases high-performance features tailored for both residential and commercial use.

The Billy Goat QB1004 is designed with a powerful engine that provides exceptional airflow, making it perfect for large properties and professional landscaping. Its compact design allows for easy maneuverability, while the adjustable air velocity setting gives users control over the airflow to suit different cleaning tasks.

Next, the QB884H offers an ergonomic design with a padded handle and lightweight construction, reducing user fatigue during extended use. This model also boasts a robust engine that delivers high suction power, enabling efficient leaf and debris collection. Its foldable design enhances portability, making it an excellent choice for tight spaces.

The QB1304H is another remarkable machine with a focus on durability and efficiency. Equipped with advanced noise reduction technology, it operates quietly without compromising power. Its heavy-duty construction ensures longevity, even in the toughest conditions.

For users requiring a versatile tool, the QB994S stands out with its multiple attachment options. This model is engineered for easy switching between vacuuming and blowing modes, offering flexibility for various outdoor tasks. The large capacity bag minimizes downtime and enables extended use before needing to be emptied.

The QB654 model is perfect for residential use, combining practicality with performance. Its lightweight design makes it easy to handle, while the strong suction power effectively collects leaves and debris with minimal effort.

The QB1304HBW is specifically created for those who demand high productivity from their equipment. This model features a high dump capability, allowing for easy disposal of collected debris without the need for cumbersome manual handling. Its robust engine ensures optimal performance under heavy workloads.

Finally, the QB554HC, known for its compact design, delivers exceptional performance without sacrificing ease of use. The high-powered engine contributes to increased efficiency, making it a favorite among homeowners and professional landscapers alike.

In summary, the Billy Goat blowers and vacuums, including the QB1004, QB884H, QB1304H, QB994S, QB654, QB1304HBW, and QB554HC, combine innovative technology with user-friendly features. Whether for residential lawns or commercial properties, these machines are designed to meet the diverse needs of outdoor cleaning and maintenance, ensuring that users can tackle any job with confidence.
Top Page Image Contents